Leave Us a Message

* Note: Please fill in the information accurately and keep communication open. We will contact you as soon as possible.

Submit
+
  • 2(1793007969330).jpg

Power-type products

The human‑friendly power‑type products are designed using top‑tier domestic power‑grade battery cells and integrate the power system, BMS, thermal management system, environmental control system, fire‑protection system, lighting system, and grounding system into a single unit. Product specifications cover three container sizes—20HC, 30HC, and 40HC—with individual container capacities ranging from a minimum of 1.89 MWh to a maximum of 5.22 MWh, enabling deployment across a wide range of capacity requirements.

WhatsApp:

  • Product Description
  • Product Introduction

    The human‑friendly power‑type products are designed using top‑tier domestic power‑grade battery cells and integrate the power system, BMS, thermal management system, environmental control system, fire‑protection system, lighting system, and grounding system into a single unit. The product lineup covers three container sizes—20HC, 30HC, and 40HC—with individual container capacities ranging from a minimum of 1.89 MWh to a maximum of 5.22 MWh, enabling flexible deployment across a wide range of capacity requirements.

    Product Features

    ■ Intelligent U-POWER power control system;

    ■ High-precision battery SOX estimation;

    ■ Intelligent constant-temperature design with separate hot and cold air streams;

    ■ Quality tracking and analysis throughout the entire product lifecycle, establishing early warning capabilities for product lifespan;

    ■ Active balancing scheme;

    ■ Modular design with flexible capacity configuration;

    ■ Pack‑level detection and protection, with a multi‑stage gas‑plus‑water automatic fire suppression system.

    System topology

    Technical Specifications

    Project F1502 Series
    Container specifications 20HC 30HC 40HC
    Full-capacity configuration 2.24MWh 3.73MWh 5.22MWh
    Configurable capacity 1.89~2.24 2.52~3.73 3.78~5.22
    Compatible voltage range 1000-1500V 1000-1500V 1000-1500V
    Charge–discharge rate 0.5CP/1CP 0.5CP/1CP 0.5CP/1CP
    Cell parameters LFP-3.2V-280Ah-896Wh LFP-3.2V-280Ah-896Wh LFP-3.2V-280Ah-896Wh
    Module Parameters LFP-51.2V-280Ah-14.336kWh LFP-51.2V-280Ah-14.336kWh LFP-51.2V-280Ah-14.336kWh
    Cycle life 8,000 cycles – 0.5 CP / 6,000 cycles – 1 CP (90% DOD, ≥70% EOL) 8,000 cycles – 0.5 CP / 6,000 cycles – 1 CP (90% DOD, ≥70% EOL) 8,000 cycles – 0.5 CP / 6,000 cycles – 1 CP (90% DOD, ≥70% EOL)
    Cycle efficiency ≥94%–0.5 CP / ≥91%–1 CP (DC side) ≥94%–0.5 CP / ≥91%–1 CP (DC side) ≥94%–0.5 CP / ≥91%–1 CP (DC side)
    BMS Solution Active balancing + three-level architecture Active balancing + three-level architecture Active balancing + three-level architecture
    Communication interface Ethernet/RS-485/CAN Ethernet/RS-485/CAN Ethernet/RS-485/CAN
    Communication Protocol Modbus-TCP/IEC61850/104 Modbus-TCP/IEC61850/104 Modbus-TCP/IEC61850/104
    Temperature control scheme Smart Inverter Air-Cooled Smart Inverter Air-Cooled Smart Inverter Air-Cooled
    Fire Safety Plan Gas / Smoke / Temperature Detection + Heptafluoropropane + Water Fire Suppression + Perfluorohexanone (optional) + Active Exhaust Ventilation Gas / Smoke / Temperature Detection + Heptafluoropropane + Water Fire Suppression + Perfluorohexanone (optional) + Active Exhaust Ventilation Gas / Smoke / Temperature Detection + Heptafluoropropane + Water Fire Suppression + Perfluorohexanone (optional) + Active Exhaust Ventilation
    Insulation resistance >10 MΩ >10 MΩ >10 MΩ
    Auxiliary power supply AC380V-50Hz AC380V-50Hz AC380V-50Hz
    Altitude ≤5000m (>3000m derating) ≤5000m (>3000m derating) ≤5000m (>3000m derating)
    Permitted ambient temperature -40~+55℃ -40~+55℃ -40~+55℃
    Allowable relative humidity 0~95% RH (no condensation) 0~95% RH (no condensation) 0~95% RH (no condensation)
    Protection rating IP65 IP65 IP65
    Corrosion resistance grade C4 (optional C5) C4 (optional C5) C4 (optional C5)
    Dimensions LWH 605824382896mm 912524382896mm 1219224382896mm
    Fully equipped weight 24T 37T 51T
    Product Certification GB/T36276, GB/T34131, UL1973, UL9540A, IEC62619, UN38.3 GB/T36276, GB/T34131, UL1973, UL9540A, IEC62619, UN38.3 GB/T36276, GB/T34131, UL1973, UL9540A, IEC62619, UN38.3

Keywords:

Get More Product Information for Free

* Note: Please fill in the information accurately and keep communication open. We will contact you as soon as possible.

Submit

Related Products


WTD-10/630A High Voltage Load Switch

WTD-10/630A High Voltage Load Switch

BHA-10/630A Export Type Isolating Switch

BHA-10/630A Export Type Isolating Switch

YB Prefabricated Substation

The B series prefabricated substation is used in 6KV and 10KV ring network power supply, dual power supply, or terminal power supply systems, serving as high-voltage distribution metering, compensation control, and protection device.

YB M/YB P Prefabricated Substation

The YBM and YBP series prefabricated substations are compact complete power distribution units that combine high-voltage electrical equipment, transformers, and low-voltage electrical equipment.
< 1 >