Leave Us a Message

* Note: Please fill in the information accurately and keep communication open. We will contact you as soon as possible.

Submit
+
  • 6(1793008783945).jpg

Box-type load-side energy storage product

The residential‑commercial load‑side containerized energy storage system features a modular design, integrating the power system, BMS, thermal management system, environmental control system, fire protection system, lighting system, and grounding system into a single unit. It is available in two configurations—10HC and 20HC—with a minimum capacity of 1.29 MWh per system, allowing users to select the configuration that best meets their specific needs.

WhatsApp:

  • Product Description
  • Product Introduction

    The residential‑commercial load‑side containerized energy storage system features a modular design, integrating the power system, BMS, thermal management system, environmental control system, fire protection system, lighting system, and grounding system into a single unit. It is available in two configurations—10HC and 20HC—with a minimum capacity of 1.29 MWh per system, allowing users to select the configuration that best meets their specific needs.

    Product Features

    ■ Intelligent constant-temperature design with separate hot and cold air streams;

    ■ High-precision battery SOX estimation;

    ■ Quality tracking and analysis throughout the entire product lifecycle, establishing early warning capabilities for product lifespan;

    ■ Modular design with flexible capacity configuration;

    ■ Active balancing scheme, enhancing the product’s usable capacity;

    ■ Pack‑level detection and protection, with a multi‑stage gas‑plus‑water automatic fire suppression system.

    Product Layout

    Technical Specifications

    Project F1002 Series
    Product model SDESS630-1290 SDESS1260-2580
    Full-capacity configuration 1290kWh 2580kWh
    Configurable capacity 1226/1290kWh 2451/2580kWh
    Cell parameters LFP-3.2V-280Ah-896Wh LFP-3.2V-280Ah-896Wh
    Module Parameters LFP-38.4V-560Ah-21.504kWh LFP-38.4V-560Ah-21.504kWh
    Maximum DC current 1200A 1200A*2
    DC voltage range 580~860 Vdc 580~860 Vdc
    Charge–discharge rate 0.5CP 0.5CP
    Cycle life 8,000 cycles (90% DOD, ≥70% EOL) 8,000 cycles (90% DOD, ≥70% EOL)
    BMS Solution Active balancing + three-level architecture Active balancing + three-level architecture
    Communication interface Ethernet/RS-485/CAN Ethernet/RS-485/CAN
    Communication Protocol Modbus-TCP/IEC61850/104 Modbus-TCP/IEC61850/104
    Temperature control scheme Smart Inverter Air-Cooled Smart Inverter Air-Cooled
    Fire Safety Plan Gas / Smoke / Temperature Detection + Heptafluoropropane + Water Fire Suppression + Perfluorohexanone (optional) + Active Exhaust Ventilation Gas / Smoke / Temperature Detection + Heptafluoropropane + Water Fire Suppression + Perfluorohexanone (optional) + Active Exhaust Ventilation
    Rated AC Voltage 400Vac/3W+PE 400Vac/3W+PE
    AC voltage range -15%~10% (range customizable) -15%~10% (range customizable)
    Rated AC Power 630kW 1260kW
    Maximum AC Current 1000A 2000A
    Maximum output power 693kVA 1386kVA
    Power factor 0.99 (adjustable range: -1 to +1) 0.99 (adjustable range: -1 to +1)
    Rated operating frequency 50 Hz/60 Hz (adjustable) 50 Hz/60 Hz (adjustable)
    Maximum harmonic distortion <3% (rated power) <3% (rated power)
    DC component <0.5% <0.5%
    Insulation resistance >3MΩ >3MΩ
    Altitude ≤5000m (>3000m derating) ≤5000m (>3000m derating)
    Permitted ambient temperature -40~+55℃ -40~+55℃
    Allowable relative humidity 0~95% RH (no condensation) 0~95% RH (no condensation)
    Protection rating IP55 IP55
    Corrosion resistance grade C4 (optional C5) C4 (optional C5)
    Dimensions LWH 299124383296mm 605824383296mm
    Fully equipped weight 14T 27T
    Product Certification GB/T 36276, GB/T 34131, GB/T 34120, GB/T 34133 GB/T 36276, GB/T 34131, GB/T 34120, GB/T 34133

Keywords:

Get More Product Information for Free

* Note: Please fill in the information accurately and keep communication open. We will contact you as soon as possible.

Submit

Related Products


WTD-10/630A High Voltage Load Switch

WTD-10/630A High Voltage Load Switch

BHA-10/630A Export Type Isolating Switch

BHA-10/630A Export Type Isolating Switch

YB Prefabricated Substation

The B series prefabricated substation is used in 6KV and 10KV ring network power supply, dual power supply, or terminal power supply systems, serving as high-voltage distribution metering, compensation control, and protection device.

YB M/YB P Prefabricated Substation

The YBM and YBP series prefabricated substations are compact complete power distribution units that combine high-voltage electrical equipment, transformers, and low-voltage electrical equipment.
< 1 >